SI Editor Navigator - Undelete 

In this Topic HideIn this Topic Show
  1. How To Use This Feature
    1. To Undelete a Subpart within the Navigator:
  2. Additional Learning Tools
  3. Technical Support Information

This command can be executed from the SI Editor's Navigator's Right-click menu or by using the keyboard shortcut Ctrl+U.

The Undelete command will restore a SubpartThe levels below a Part are referred to as Subparts. These Subpart levels are then broken down into and referenced as Articles, Paragraphs and Subparagraphs, although the share the same Subpart <SPT> Tag that was previously marked for deletion by removing the DEL tags. While editing within the Navigator, the SI Editor's Undo and Redo commands can be used.

Illustration Icon Indicating Helpful HintTo learn more about the Navigator, refer to the Navigator Overview topic.

How To Use This Feature

Illustration Icon Indicating How To StepsTo Undelete a Subpart within the Navigator:

  1. In the Navigator, select the deleted Subpart, then perform one of the following:
    1. Right-click and select Undelete
    2. Use the keyboard shortcut Ctrl+U

Additional Learning Tools

Illustration Icon Indicating eLearning ModulesWatch The Navigator eLearning module within Chapter 3 - Editing.

 

Users are encouraged to visit the SpecsIntact Website's Support & Help Center for access to all of our User Tools, including Web-Based Help (containing Troubleshooting, Frequently Asked Questions (FAQs), Technical Notes, and Known Problems), eLearning Modules (video tutorials), and printable Guides.

CONTACT US:
  256.895.5505
  SpecsIntact@usace.army.mil
  SpecsIntact.wbdg.org