WEBVTT

1
00:00:10.660 --> 00:00:15.160
Sometimes it is necessary to overwrite a
Section within a Job from the original

2
00:00:15.160 --> 00:00:20.200
source. This feature will work as long as
the original source was a Master or Job that

3
00:00:20.200 --> 00:00:22.360
is still available on your system.

4
00:00:23.100 --> 00:00:27.950
The Overwrite function eliminates the need
to delete a Section and then add it back in,

5
00:00:27.950 --> 00:00:29.760
therefore saving you time.

6
00:00:30.300 --> 00:00:36.120
Overwriting a Section can be accomplished by
selecting the Section in the right pane, then

7
00:00:36.120 --> 00:00:42.270
select the Sections Menu and Overwrite or
right-click on a

8
00:00:42.270 --> 00:00:44.850
Section and select Overwrite.

9
00:00:45.780 --> 00:00:51.030
When the confirmation window opens, you have
the option to unselect the Section or Cancel

10
00:00:51.030 --> 00:00:56.460
in order to leave the Section in your Job
unchanged, or Select OK to proceed.

11
00:00:56.820 --> 00:00:59.220
Let's go ahead and select OK.

12
00:00:59.250 --> 00:01:04.930
Immediately a message box appears to let you
know that the Section has been overwritten,

13
00:01:04.930 --> 00:01:07.140
so let's go ahead and click OK.

14
00:01:07.350 --> 00:01:12.630
As soon as the Tailoring Options dialog box
opens, the pre- selected Tailoring Options

15
00:01:12.630 --> 00:01:18.450
will already be unchecked or you can make
the necessary selections and click OK.

16
00:01:19.220 --> 00:01:20.930
For this demonstration.

17
00:01:20.930 --> 00:01:23.250
I'm going to select Cancel.

18
00:01:23.250 --> 00:01:27.170
When you are trying to overwrite a Section
where the original source is no longer

19
00:01:27.170 --> 00:01:32.090
available, the software will inform you that
it is unable to overwrite the Section and

20
00:01:32.090 --> 00:01:34.080
provide the name of the source.

21
00:01:34.100 --> 00:01:39.020
In this case, you may decide to use the Add
Sections function to overwrite a Section from

22
00:01:39.020 --> 00:01:40.580
the UFGS Master.

23
00:01:40.940 --> 00:01:45.470
To learn more about the feature SpecsIntact
offers, proceed to the next module of your

24
00:01:45.470 --> 00:01:46.280
choice.