SI Explorer Sections Menu - Delete 

This command can also be executed from the SpecsIntact Explorer's Right-click menu or by using the keyboard Delete key.

The Delete command enables the permanent removal of unwanted Section (.sec) files. This is essential for streamlining content and optimizing data management by purging irrelevant Sections.

Before making significant changes to a Job or Master, it's always recommended to create a backup first. You can do this easily by going to the File menu > Backup and Restore.

How To Use This Feature

How to Delete Single or Multiple Sections:

1. In the SpecsIntact Explorer, select a Job or Master
2.  In the Contents panel, perform one of the following:
   1. Select a Section
   2. Press-and-hold the Shift key to select multiple consecutive Sections
   3. Press-and-hold the Ctrl key to select multiple non-consecutive Sections
3. Once the Section(s) are highlighted, perform one of the following:
   1. Right-click and select Delete
   2. Select the Sections menu and select Delete
   3. Use the keyboard Delete key
4. When the Confirm Selections to Delete window opens, perform one of the following:
   1. Leave the default selections
   2. Select the Sections you do not want to delete (unhighlighted)
5. Click OK
6. When the Section Deleted window appears, click OK

Technical Support Information

Users are encouraged to visit the SpecsIntact Website's Support & Help Center for access to all of our User Tools, including Web-Based Help (containing Troubleshooting, Frequently Asked Questions (FAQs), Technical Notes, and Known Problems), eLearning Modules (video tutorials), and printable Guides.

CONTACT US:
		256.895.5505
		SpecsIntact@usace.army.mil
		SpecsIntact.wbdg.org