SpecsIntact Help
Click here to see this page in full context

SI Editor Insert Menu - Tags 

In this Topic HideIn this Topic Show
  1. How To Use This Feature
    1. To Insert a Tag:
    1. To Customize my Tagsbar:
  2. Technical Support Information

This command can also be executed from the SI Editor's keyboard shortcut F4.

The Insert Tag command opens a window and provides a list of available tags from which you can select a tag to insert at the cursor position.

Illustration SI Editor's Insert Menu - Insert Tag window

The most commonly used tags may also be inserted using the Tagsbar buttons. The Tagsbar provides pre-defined common tags, simplifying the tagging of frequently used elements within the specification.

Illustration Icon Indicating Important Information To NoteIt is best to make tags visible by selecting Tags from the View menu, or by clicking the Toggle Tags View  Illustration SI Editor's Tagsbar Tags button button on the Toolbar.  

How To Use This Feature

Illustration Icon Indicating How To StepsTo Insert a Tag:

  1. In the SI Editor, place your cursor in the desired location and press F4
  2. In the Insert Tag window, perform one of the following:
    1. Type the first letter of the tag and repeat the letter for subsequent tags beginning with the same letter
    2. Select the drop-down arrow and select the available tag from the list
    3. When a tag is selected, its description appears next to the tag name, click OK

Illustration Icon Indicating How To StepsTo Customize my Tagsbar:

  1. On the Tagsbar, select the Toolbar Options button
  2. Select Add or Remove Buttons
  3. Check or Uncheck the desired tags

 

Users are encouraged to visit the SpecsIntact Website's Support & Help Center for access to all of our User Tools, including Web-Based Help (containing Troubleshooting, Frequently Asked Questions (FAQs), Technical Notes, and Known Problems), eLearning Modules (video tutorials), and printable Guides.

CONTACT US:
  256.895.5505
  SpecsIntact@usace.army.mil
  SpecsIntact.wbdg.org