Comment On This Page
Search CCB
Handbook for Concrete and Cement
See the Table of Contents for a complete listing. Those standards and specifications that are dual CRD-C and ASTM or ACI may be obtained from those organizations. The remainder are available below.
These documents are available in the following format:
Adobe Acrobat (PDF)
| Title | Date | Downloads |
|---|---|---|
| Handbook for Concrete and Cement - Table of Contents; revised 12/02 | 03-01-1997 | 67 KB |
| Federal Specification and American Concrete Institute Standards - Index | 09-01-1997 | 37 KB |
| CRD-C6-74 Method of Test for Remolding Effort of Freshly Mixed Concrete | 03-01-1974 | 589 KB |
| CRD-C24-01 Standard Test Method for Comparing Concretes on Basis of Bond Developed with Reinforced Steel | 2001 | 45 KB |
| CRD-C32-84 Standard Test Method for Flow Under Water of Hydraulic-Cement Concrete | 03-01-1984 | 962 KB |
| CRD-C36-73 Method of Test for Thermal Diffusivity of Concrete | 12-01-1973 | 63 KB |
| CRD-C37-73 Method of Test for Thermal Diffusivity of Mass Concrete | 12-01-1973 | 237 KB |
| CRD-C38-73 Method of Test for Temperature Rise in Concrete | 12-01-1973 | 221 KB |
| CRD-C39-81 Test Method for Coefficient of Linear Thermal Expansion of Concrete | 06-01-1981 | 13 KB |
| CRD-C44-63 Method for Calculation of Thermal Conductivity of Concrete | 06-01-1963 | 10 KB |
| CRD-C45-65 Method of Test for Thermal Conductivity of Lightweight Insulating Concrete | 12-01-1965 | 75 KB |
| CRD-C48-92 Standard Test Method for Water Permeability of Concrete | 12-01-1992 | 75 KB |
| CRD-C49-74 Supplementary Standard Methods of Making and Curing Concrete Test Specimens in the Laboratory | 06-01-1974 | 28 KB |
| CRD-C50-69 Method of Test for Effect of Grinding During Concrete Mixing on the Grading of Aggregates | 03-01-1969 | 17 KB |
| CRD-C53-01 Test Method for Consistency of No-Slump Concrete Using Modified Vebe Apparatus | 12-2001 | 22 KB |
| CRD-C55-92 Test Method for Within-Batch Uniformity of Freshly Mixed Concrete | 09-01-1992 | 114 KB |
| CRD-C61-89A Test Method for Determining the Resistance of Freshly Mixed Concrete to Washing Out in Water | 12-01-1989 | 441 KB |
| CRD-C62-69 Method of Testing Cylindrical Test Specimens for Planeness and Parallelism of Ends and Perpendicularity of Sides | 12-01-1969 | 248 KB |
| CRD-C71-80 Standard Test Method for Ultimate Tensile Strain Capacity of Concrete | 03-01-1980 | 310 KB |
| CRD-C72-01 Standard Test Methods for Determining the Cement | 2001 | 73 KB |
| CRD-C82-01 Standard Test Methods for Determining the Water | 2001 | 56 KB |
| CRD-C89-64 Method of Test for Longitudinal Shear Strength, Unconfined, Single Plane | 03-01-1964 | 332 KB |
| CRD-C90-73 Method of Test for Transverse Shear Strength, Confined, Single Plane or Double Plane | 09-01-1973 | 43 KB |
| CRD-C94-66 Corps of Engineers Specification for Surface Retarders | 03-01-1995 | 5 KB |
| CRD-C100-75 Method of Sampling Concrete Aggregate and Aggregate Sources, and Selection of Material for Testing | 03-01-1975 | 65 KB |
| CRD-C104-80 Method of Calculation of the Fineness Modulus of Aggregate | 03-01-1980 | 13 KB |
| CRD-C112-69 Method of Test for Surface Moisture in Aggregate by Water Displacement | 09-01-1969 | 76 KB |
| CRD-C114-97 Test Method for Soundness of Aggregates by Freezing and Thawing of Concrete Specimens | 03-01-1997 | 71 KB |
| CRD-C120-94 Test Method for Flat and Elongated Particles in Fine Aggregate | 09-01-1994 | 65 KB |
| CRD-C124-73 Method of Test for Specific Heat of Aggregates, Concrete, and Other Materials (Method of Mixtures) | 06-01-1973 | 31 KB |
| CRD-C125-63 Method of Test for Coefficient of Linear Thermal Expansion of Coarse Aggregates (Strain-Gage Method) | 06-01-1963 | 689 KB |
| CRD-C126-63 Method of Test for Coefficient of Thermal Expansion of Mortar | 06-01-1963 | 20 KB |
| CRD-C130-01 Standard Recommended Practice for Estimating Scratch Hardness of Course Aggregate Particles | 2001 | 19 KB |
| CRD-C143-62 Specifications for Meters for Automatic Indication of Moisture in Fine Aggregates | 06-01-1962 | 10 KB |
| CRD-C144-92 Standard Test Method for Resistance of Rock to Freezing and Thawing | 12-01-1992 | 18 KB |
| CRD-C148-69 Method of Testing Stone for Expansive Breakdown on Soaking in Ethylene Glycol | 03-01-1969 | 13 KB |
| CRD-C154-77 Standard Test Method for Determination of Moisture in Fine Aggregate for Concrete by Means of a Calcium-Carbide Gas Pressure Meter | 12-01-1977 | 78 KB |
| CRD-C161-92 Standard Practice for Selecting Proportions for Roller-Compacted Concrete (RCC) Pavement Mixtures Soil Compaction Concepts | 09-01-1992 | 51 KB |
| CRD-C163-92 Test Method for Water Permeability of Concrete Using Triaxial Cell | 09-01-1992 | 33 KB |
| CRD-C164-92 Standard Test Method for Direct Tensile Strength of Cylindrical Concrete of Mortar Specimens | 12-01-1992 | 35 KB |
| CRD-C166-92 Standard Test Method for Static Modulus of Elasticity of Concrete in Tension | 12-01-1992 | 77 KB |
| CRD-C169-97 Standard Test Method for Resistance of Rock to Wetting and Drying | 09-01-1997 | 18 KB |
| CRD-C171-94 Standard Test Method for Determining Percentage of Crushed Particles in Aggregate | 06-01-1995 | 25 KB |
| CRD-C213-92 Test Method for the Presence of Sugar in Cement, Mortar, Concrete, or Aggregates | 09-01-1992 | 6 KB |
| CRD-C231-63 Method of Test for Volume Changes in Neat Cement Bars | 06-01-1963 | 233 KB |
| CRD-C260-01 Standard Test Mothod for Tensile Strength of Hydraulic Cement Mortars | 2001 | 57 KB |
| CRD-C261-76 Method of Test to Determine Whether Portland Cement is Contaminated with Fly Ash | 03-01-1968 | 10 KB |
| CRD-C300-90 Corp of Engineers Specifications for Membrane-Forming Compounds for Curing Concrete | 06-01-1990 | 32 KB |
| CRD-C301-67 Methods for Sampling, Packaging, Marking, and Delivery of Membrane-Forming Compounds for Curing Concrete | 06-01-1967 | 53 KB |
| CRD-C302-79 Test Method for Sprayability and Unit Moisture Loss Through the Membrane Formed by a Concrete Curing Compound | 06-01-1979 | 707 KB |
| CRD-C307-91 Method for Calculation of Amount of Ice Needed to Produce Mixed Concrete of a Specified Temperature | 03-01-1991 | 14 KB |
| CRD-C311-69 Method of Test for Drying Time and Reflectance by the Membrane Formed by a Concrete Curing Compound | 12-01-1969 | 18 KB |
| CRD-C316-79 Federal Specification: Thinner, Paint, Mineral Spirits, Regular and Odorless (TT-T-291F with Interim Amendment 1 and Notice 1) | 1979 | 716 KB |
| CRD C318-79 Federal Specification (for) Cloth, Burlap, Jute (or Kenaf) (CCC-C-467C with Notice 1) | 02-01-1972 | 35 KB |
| CRD-C400-63 Requirements for Water for Use in Mixing or Curing Concrete | 06-01-1963 | 11 KB |
| CRD-C401-75 Method of Test for the Straining Properties of Water | 06-01-1975 | 15 KB |
| CRD-C403-71 Test Method for Determination of Sulfate Ion in Soils and Water | 09-01-1971 | 39 KB |
| CRD-C406-79 Test Method for Compressive Strength of Mortar for Use in Evaluating Water for Mixing Concrete | 06-01-1979 | 12 KB |
| CRD-C513-74 Corps of Engineers Specifications for Rubber Waterstops | 06-01-1974 | 13 KB |
| CRD-C514-92 Concrete Plant Standards - Ninth Revision | 12-01-1992 | 69 KB |
| CRD-C515-81 Method of Preparation of Test Specimens from Rubber of Plastic Waterstop | 09-01-1981 | 17 KB |
| CRD-C516-71 Method of Test for Verification of Compression Testing Machines Using Calibrated Proving Rings | 06-01-1971 | 41 KB |
| CRD-C517-71 Method of Test for Verifying Machines for Use in Flexural Strength Tests of Concrete Mattresses | 09-01-1971 | 2.2 MB |
| CRD-C521-81 Standard Test Method for Frequency and Amplitude of Vibrators for Concrete | 09-01-1981 | 28 KB |
| CRD-C522-88 Standard Methods of Testing Joint Sealants, Cold-Applied, Non-Jet-Fuel-Resistant for Rigid and Flexible Pavements | 12-01-1988 | 44 KB |
| CRD-C525-89 Corps of Engineers Test Method for Evaluation of Hot-Applied Joint Sealants for Bubbling Due to Heating | 12-01-1989 | 7 KB |
| CRD-C526-92 Federal Specification: Sealants, Joint, Two-Component, Jet-Blast-Resistant, Cold-Applied for Portland Cement Concrete Pavement (SS-S-200E) | 12-01-1992 | 104 KB |
| CRD-C527-88 Standard Specification for Joint Sealants, Cold-Applied, Non-Jet-Fuel-Resistant, for Rigid and Flexible Pavements | 12-01-1988 | 12 KB |
| CRD-C529-92 Federal Specification, Sealants, Joint, Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Tar Concrete Pavements (SS-S-1614A with Amendement 1 and Notices 1 & 2) | 1992 | 809 KB |
| CRD-C530-92 Federal Specification, Sealant, Joint, Not-Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Asphalt Concrete Pavements (SS-S-1401C with Amendment 1 and Notices 1 & 2) | 1992 | 965 KB |
| CRD-C540-01 Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements, Sawable Type | 2001 | 12 KB |
| CRD-C541-88 Sealing Compound, Elastomeric Type, Single Component (for Calking, Sealing and Glazing in Buildings and Other Structures) (TT-S-00230c with Amendment 2 and Notice 1) | 1988 | 2.5 MB |
| CRD-C542-79 Sealing Compound: Silicone Rubber Base (for Calking, Sealing and Glazing in Buildings and Other Structures) (TT-S-001543A) | 1979 | 424 KB |
| CRD-C543-79 Sealing Compound: Single Component, Butyl Rubber Based, Solvent Release Type (for Buildings and Other Types of Construction) (TT-S-001657 with Notice 1) | 1979 | 572 KB |
| CRD-C544-92 Insulation, Blankets, Thermal (Mineral Fiber, Industrial Type) (Inch-Pound) (HH-I-558C) | 1992 | 493 KB |
| CRD-C547-88 Standard Methods of Testing for Jet-Fuel and Heat Resistance of Preformed Polychloroprene Elastomeric Joint Seals... | 12-01-1988 | 12 KB |
| CRD-C548-88 Standard Specifications for Jet-Fuel and Heat-Resistant Preformed Polychloroprene Elastomeric Joint Seals for Rigid Pavements | 12-01-1988 | 6 KB |
| CRD-C572-74 Corps of Engineers Specifications for Polyvinylchoride Waterstops | 06-01-1974 | 22 KB |
| CRD-C575-74 Method of Test for Change in Weight of Rubber on Immersion in Water | 06-01-1974 | 18 KB |
| CRD-C620-80 Standard Method of Sampling Fresh Grout | 12-01-1980 | 9 KB |
| CRD-C643-01 Standard Test Methods for Compressive Strength of Masonry Prisms | 2001 | 28 KB |
| CRD-C649-95 Standard Test Method for Unit Weight, Marshall Stability, and Flow of Bituminous Mixture | 02-01-1995 | 371 KB |
| CRD-C650-95 Standard Test Method for Density and Percent Voids in Compacted Bituminous Paving Mixtures | 12-01-1995 | 62 KB |
| CRD-C651-95 Standard Gyratory Testing Machine Method for Design of Hot-Mix Bituminous Pavement Mixtures | 12-01-1995 | 318 KB |
| CRD-C652-95 Standard Test Method for Measurement of Reduction in Marshall Stability of Bituminous Mixtures Caused by Immersion in Water | 12-01-1995 | 12 KB |
| CRD-C653-95 Standard Test Method for Determination of Moisture-Density Relation of Soils | 12-01-1995 | 99 KB |
| CRD-C654-95 Standard Test Method for Determining the California Bearing Ratio of Soils | 12-01-1995 | 217 KB |
| CRD-C655-95 Standard Test Method for Determining the Modulus of Soil Reaction | 12-01-1995 | 60 KB |
| CRD-C656-95 Standard Test Method for Determining the California Bearing Ratio and for Sampling Pavment by the Small-Aperture Procedure | 12-01-1995 | 138 KB |
| CRD C661-06 Specification for Antiwashout Admixtures for Concrete | 03-01-2006 | 58 KB |
| CRD C662-10 Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials, Lithium Nitrate Admixture and Aggregate (Accelerated Mortar-Bar Method) | 2010 | 57 KB |